-
tmSciNoteCutoff
-
This resource sets the value used for all
TickMark label formats that have the dynamic
attribute set on for the exponent switch length (as specified by the
Floating Point Format Specification
scheme). By default all the label format strings set the exponent
switch length dynamic attribute on, causing the value of
tmSciNoteCutoff to specify the number of digits used to
control switching between exponential and floating point format when
generic formatting is in effect. If you explicitly set the exponent
switch length conversion field (signalled by the '?' character) in the
format string to anything other than the dynamic value ('*'), the value
in the format string overrides the value set for tmSciNoteCutoff.
Default: 6
-
tmBorderThicknessF
-
Sets the linewidth scale factor for the tick mark border. The
linewidth is a multiple of the parent workstation devices minimum
linewidth.
Default: 2.0
-
tmBorderLineColor
-
Set the color of the tick mark border.
Default: 1
-
tmXUseBottom
-
Causes the top tick marks to use the resources for the bottom
tickmarks. The resources affected are:
tmXTStyle, tmXTMode,
tmXTMinorPerMajor, tmXTNoMinor,
tmXTDataLeftF, tmXTDataRightF,
tmXTTickStartF, tmXTTickEndF, tmXTMaxTicks,
tmXTTickSpacing, tmXTValues, tmXTLabels,
tmXTMajorThicknessF, tmXTMajorLineColor,
tmXTMajorLengthF, tmXTMajorOutwardLengthF,
tmXTMinorThicknessF, tmXTMinorLineColor,
tmXTMinorLengthF, tmXTMinorOutwardLength,
tmXTLabelFont, tmXTLabelFontHeightF,
tmXTLabelFontColor, tmXTLabelFontAspectF,
tmXTLabelAngleF, tmXTLabelDirection,
tmXTLabelDeltaF, tmXTIrregularPoints,
tmXTIrrTensionF, tmXTLabelStride,
tmXTAutoPrecision, tmXTPrecision and
tmXTFormat.
All other Top TickMark resources are unaffected.
Default: True
-
tmXMajorGrid
-
Setting to True turns on the X Axis major grid; False turns it
off. Grid lines will extend the bot tom tick marks to the top
border. If the bottom ticks are turned off the top tick marks will be
extended to the bottom.
Default: False
-
tmXMinorGrid
-
Setting to True turns on the X Axis minor grid; False turns it
off. Grid lines will extend the bottom tick marks to the top
border. If the bottom ticks are turned off the top tick marks w ill be
extended to the bottom.
Default: False
-
tmXMajorGridThicknessF
-
Sets the linewidth scale factor for the thickness of the major X Axis
grid lines . Value is a multiple of the devices minimum linewidth.
Default: 2.0
-
tmXMajorGridLineColor
-
Sets color index for major X Axis grid lines.
Default: 1
-
tmXMajorGridLineDashPattern
-
Sets dash pattern index for the major X Axis grid lines.
Default: 0
-
tmXMinorGridThicknessF
-
Sets the linewidth scale factor for minor the grid. Value is a
multiple of the devices minimum linewidth.
Default: 1.0
-
tmXMinorGridLineColor
-
Sets color index for minor X Axis grid lines.
Default: 1
-
tmXMinorGridLineDashPattern
-
Sets dash pattern index for minor X Axis grid lines.
Default: 0
-
tmXBOn
-
Setting to True turns on bottom tick marks; False turns them off.
Default: True
-
tmXTOn
-
Setting to True turns on top tick marks; False turns them off.
Default: True
-
tmXBLabelsOn
-
Setting to True turns on tick mark labels if tmXBOn is set;
False turns them off.
Default: True
-
tmXTLabelsOn
-
Setting to True turns on tick mark labels if tmXTOn is set;
False turns them off.
Default: False
-
tmXBBorderOn
-
Setting to True turns bottom border on; False turns it off. Does not turn off
bottom ticks.
Default: True
-
tmXTBorderOn
-
Setting to True turns top border on; False turns it off. Does not turn
off top ticks.
Default: True
-
tmXBMode
-
This enumerated resource of type NhlTTickMarkMode determines
the method for specifying the spacing of the ticks and the contents of
the labels along the bottom X-Axis. It has three possible settings:
Automatic:
- Based on the values of tmXBDataLeftF and
tmXBDataRightF TickMark chooses a 'nice'
spacing between the major tick marks, such that the number of major
ticks does not exceed the value of tmXBMaxTicks. Labels are
generated based on the current settings of tmSciNoteCutoff,
tmXBAutoPrecision, tmXBPrecision, and
tmXBFormat.
Manual:
- Starting with the value tmXBTickStartF
TickMark sets major tick marks at intervals separated
by a distance of tmXBTickSpacingF until tmXBTickEndF
is exceeded. Of these tick marks, only those that fall between
tmXBDataLeftF and tmXBDataRightF may appear along
the bottom X-Axis. If tmXBTickStartF and
tmXBTickEndF are not set TickMark issues an
informational message and sets tmXBTickStartF to the minimum of
tmXBDataLeftF and tmXBDataRightF and
tmXBTickEndF to the maximum of tmXBDataLeftF and
tmXBDataRightF. If tmXBTickSpacingF is not set
TickMark issues a warning message and
tmXBMode reverts to
Automatic mode. Labels are
generated based on the current settings of tmXBTickSpacingF,
tmSciNoteCutoff, tmXBAutoPrecision,
tmXBPrecision, and tmXBFormat.
Explicit:
- TickMark uses the array resource tmXBValues
to determine the coordinate positions of the tick marks. Of these
tick marks, only those that fall between tmXBDataLeftF and
tmXBDataRightF may appear along the bottom X-Axis. If
tmXBValues is not set TickMark issues a
warning message and tmXBMode reverts to
Automatic mode. The corresponding element of the string
array resource tmXBLabels determines the label used for each
tick specified by tmXBValues. If tmXBLabels is not
set, TickMark issues a warning and outputs no labels for
the bottom X-Axis.
Default: Automatic
-
tmXTMode
-
This enumerated resource of type NhlTTickMarkMode determines
the method for specifying the spacing of the ticks and the contents of
the labels along the top X-Axis. It has three possible settings:
Automatic:
- Based on the values of tmXTDataLeftF and
tmXTDataRightF TickMark chooses a 'nice'
spacing between the major tick marks, such that the number of major
ticks does not exceed the value of tmXTMaxTicks. Labels are
generated based on the current settings of tmSciNoteCutoff,
tmXTAutoPrecision, tmXTPrecision, and
tmXTFormat.
Manual:
- Starting with the value tmXTTickStartF
TickMark sets major tick marks at intervals separated
by a distance of tmXTTickSpacingF until tmXTTickEndF
is exceeded. Of these tick marks, only those that fall between
tmXTDataLeftF and tmXTDataRightF may appear along
the top X-Axis. If tmXTTickStartF and tmXTTickEndF
are not set TickMark issues an informational message
and sets tmXTTickStartF to the minimum of
tmXTDataLeftF and tmXTDataRightF and
tmXTTickEndF to the maximum of tmXTDataLeftF and
tmXTDataRightF. If tmXTTickSpacingF is not set
TickMark issues a warning message and
tmXTMode reverts to
Automatic mode. Labels are
generated based on the current settings of tmXTTickSpacingF,
tmSciNoteCutoff, tmXTAutoPrecision,
tmXTPrecision, and tmXTFormat.
Explicit:
- TickMark uses the array resource tmXTValues
to determine the coordinate positions of the tick marks. Of these
tick marks, only those that fall between tmXTDataLeftF and
tmXTDataRightF may appear along the top X-Axis. If
tmXTValues is not set TickMark issues a
warning message and tmXTMode reverts to
Automatic mode. The corresponding element of the string
array resource tmXTLabels determines the label used for each
tick specified by tmXTValues. If tmXTLabels is not
set, TickMark issues a warning and outputs no labels for
the top X-Axis.
Default: Automatic
-
tmXBStyle
-
This enumerated resource of type NhlTTickMarkStyle sets the
style of the TickMark bottom X-Axis. There are 5 styles:
Linear:
- A linear coordinate system is set up along the X-Axis with the left
boundary set to the value of tmXBDataLeftF and the right
boundary set to the value of tmXBDataRightF. If
tmXBDataLeftFand tmXBDataRightF are found to be
equal when compared with a precision of 7 significant digits, a
warning is issued and the bottom X-Axis tick marks are turned off.
Log:
- A logarithmic coordinate system is set up along the X-Axis with
the left boundary set to the value of tmXBDataLeftF and the
right boundary set to the value of tmXBDataRightF. If either
tmXBDataLeftF or tmXBDataRightF is less than or equal
to 0.0, a warning is issued an the bottom X-Axis tick marks are turned off.
Irregular:
- An irregular coordinate system is set up along the X-Axis based on
the coordinate samples contained in the array resource
tmXBIrregularPoints. If tmXBIrregularPoints is found
to be invalid, a warning is issued and tmXBStyle reverts to
Linear. If the data bounds tmXBDataLeftF or
tmXBDataRightF are only partially within the range defined by
the maximum and minimum elements of tmXBIrregularPoints, a
warning is issued and, as appropriate, either tmXBDataLeftF or
tmXBDataRightF is reset to the value of the maximum or
minimum element of the tmXBIrregularPoints. If
the range between tmXBDataLeftF and tmXBDataRightF
is entirely outside the range of the tmXBIrregularPoints
array a fatal error is currently issued.
Time:
- Not yet implemented.
Geographic:
- Not yet implemented.
This resource may be intercepted or disabled by:
Default: Linear
-
tmXBIrrTensionF
-
Specifies the value of the tension parameter applied to the spline
approximation used to set up an irregular transformation based on the
values in tmXBIrregularPoints array. This resource is only
used if tmXBStyle is
Irregular. Small values (less than
~1.0) imply a relaxed approximation; large values (greater than ~5.0)
imply a tight approximation.
This resource may be intercepted or disabled by:
V4.0 Status Note 2
Default: 2.0
-
tmXTStyle
-
This enumerated resource of type NhlTTickMarkStyle sets the
style of the TickMark top X-Axis. There are 5 styles:
Linear:
- A linear coordinate system is set up along the X-Axis with the left
boundary set to the value of tmXTDataLeftF and the right
boundary set to the value of tmXTDataRightF. If
tmXTDataLeftFand tmXTDataRightF are found to be
equal when compared with a precision of 7 significant digits, a
warning is issued and the top X-Axis tick marks are turned off.
Log:
- A logarithmic coordinate system is set up along the X-Axis with
the left boundary set to the value of tmXTDataLeftF and the
right boundary set to the value of tmXTDataRightF. If either
tmXTDataLeftF or tmXTDataRightF is less than or equal
to 0.0, a warning is issued an the top X-Axis tick marks are turned off.
Irregular:
- An irregular coordinate system is set up along the X-Axis based on
the coordinate samples contained in the array resource
tmXTIrregularPoints. If tmXTIrregularPoints is found
to be invalid, a warning is issued and tmXTStyle reverts to
Linear. If the data bounds tmXTDataLeftF or
tmXTDataRightF are only partially within the range defined by
the maximum and minimum elements of tmXTIrregularPoints, a
warning is issued and, as appropriate, either tmXTDataLeftF or
tmXTDataRightF is reset to the value of the maximum or
minimum element of the tmXTIrregularPoints. If
the range between tmXTDataLeftF and tmXTDataRightF
is entirely outside the range of the tmXTIrregularPoints
array a fatal error is currently issued.
Time:
- Not yet implemented.
Geographic:
- Not yet implemented.
This resource may be intercepted or disabled by:
Default: Linear
-
tmXTIrrTensionF
-
Specifies the value of the tension parameter applied to the spline
approximation used to set up an irregular transformation based on the
values in tmXTIrregularPoints array. This resource is only
used if tmXTStyle is
Irregular. Small values (less than
~1.0) imply a relaxed approximation; large values (greater than ~5.0)
imply a tight approximation.
This resource may be intercepted or disabled by:
V4.0 Status Note 2
Default: 2.0
-
tmXBAutoPrecision
-
When True this boolean resource causes TickMark to
set the precision (number of significant digits) for the bottom tick
mark labels based on the range of values used for the labels. In
general, the value of tmXBPrecision is ignored. However, if
tmXBMode is set to
Manual, the precision is set
such that all significant digits necessary to express the value of the
tmXBTickSpacingF resource are used in determining the
precision. In this case, the value of tmXBPrecision sets a
cap on the number of significant digits used to express the value of
tmXBTickSpacingF.
When set False, the value of tmXBPrecision controls the
precision. However, if the significant digit conversion field
(signalled by the '.' character) is set explicitly in the
tmXBFormat string (according to the rules of Floating Point Format Specification scheme),
then the resources tmXBAutoPrecision and
tmXBPrecision are both ignored, and the precision is
controlled completely by the tmXBFormat specification.
Default: True
-
tmXBPrecision
-
If tmXBAutoPrecision is set False and the significant digit
field in the tmXBFormat string (as specified by the
Floating Point Format Specification
scheme) has the dynamic attribute set on, this resource controls the
precision used for the bottom tick mark labels. Assuming the default
setting of the tmXBFormat resource, the value set for
tmXBPrecision will be the number of digits used for the
bottom tick mark label representing the value with the maximum absolute
value. The other labels will have the same number of digits to the
right of the decimal point, but may have fewer digits to the left of
the decimal point. All labels will be rounded to the number of decimal
places represented.
Default: 4
-
tmXBFormat
-
This string resource specifies, according to the HLU Floating Point Format Specification scheme,
the format of the numbers used to label the major ticks along the
bottom X-Axis. It applies only when tmXBMode is set to
Automatic or Manual. Unless set explicitly,
the significant digits conversion field is set dynamically based on
the values of the tmXBAutoPrecision and
tmXBPrecision resources. Likewise, the exponent switch length
conversion field is set dynamically based on the value of the
tmSciNoteCutoff resource. If the leftmost significant digit
conversion field has the dynamic attribute set, the assumed leftmost
significant digit is set dynamically for each label based on largest
absolute value used to generate the bottom labels. Combined with the
zero format flag, this has the effect of causing all the labels to
contain the same number of places to the right of the decimal
point. The default format string also sets the at-sign format flag to
force fractional values to include an initial '0' character preceding
the decimal point. In addition, the exponent conversion field
includes, by default, the 's' flag to cause exponents to be written
using the superscript notational form.
If tmXBStyle is set to Log, exponential
notation is forced on, regardless of the character used for the
conversion specifier. Also the zero flag is turned off to ensure that
the mantissas (which always evaluate to 1.0 because of the spacing
enforced for Log style labels) are not turned on because
of the need to fill out the significant digits on the right of the
decimal point.
Default: "0@*+^sg"
-
tmXTAutoPrecision
-
When True this boolean resource causes TickMark to
set the precision (number of significant digits) for the top tick
mark labels based on the range of values used for the labels. In
general, the value of tmXTPrecision is ignored. However, if
tmXTMode is set to
Manual, the precision is set
such that all significant digits necessary to express the value of the
tmXTTickSpacingF resource are used in determining the
precision. In this case, the value of tmXTPrecision sets a
cap on the number of significant digits used to express the value of
tmXTTickSpacingF.
When set False, the value of tmXTPrecision controls the
precision. However, if the significant digit conversion field
(signalled by the '.' character) is set explicitly in the
tmXTFormat string (according to the rules of Floating Point Format Specification
scheme),then the resources tmXTAutoPrecision and
tmXTPrecision are both ignored, and the precision is
controlled completely by the tmXTFormat specification.
Default: True
-
tmXTPrecision
-
If tmXTAutoPrecision is set False and the significant digit
field in the tmXTFormat string (as specified by the
Floating Point Format Specification
scheme) has the dynamic attribute set on, this resource controls the
precision used for the top tick mark labels. Assuming the default
setting of the tmXTFormat resource, the value set for
ptmXTPrecision will be the number of digits used for the
top tick mark label representing the value with the maximum absolute
value. The other labels will have the same number of digits to the
right of the decimal point, but may have fewer digits to the left of
the decimal point. All labels will be rounded to the number of decimal
places represented.
Default: 4
-
tmXTFormat
-
This string resource specifies, according to the HLU Floating Point Format Specification scheme,
the format of the numbers used to label the major ticks along the top
X-Axis. It applies only when tmXTMode is set to
Automatic or Manual. Unless set explicitly,
the significant digits conversion field is set dynamically based on
the values of the tmXTAutoPrecision and
tmXTPrecision resources. Likewise, the exponent switch length
conversion field is set dynamically based on the value of the
tmSciNoteCutoff resource. If the leftmost significant digit
conversion field has the dynamic attribute set, the assumed leftmost
significant digit is set dynamically for each label based on largest
absolute value used to generate the top labels. Combined with the zero
format flag, this has the effect of causing all the labels to contain
the same number of places to the right of the decimal point. The
default format string also sets the at-sign format flag to force
fractional values to include an initial '0' character preceding the
decimal point. In addition, the exponent conversion field includes, by
default, the 's' flag to cause exponents to be written using the
superscript notational form.
If tmXTStyle is set to Log, exponential
notation is forced on, regardless of the character used for the
conversion specifier. Also the zero flag is turned off to ensure that
the mantissas (which always evaluate to 1.0 because of the spacing
enforced for Log style labels) are not turned on because
of the need to fill out the significant digits on the right of the
decimal point.
Default: "0@*+^sg"
-
tmXBMinorPerMajor
-
Sets the number of minor tick marks per major tick mark for the bottom
X Axis. If
Log style is used only 1, 4, and 8 are valid
minor per major numbers. If Explicit mode is used this
resource is ignored.
Default: 3
-
tmXTMinorPerMajor
-
Sets the number of minor tick marks per major tick mark for the top x
axis. If
Log style is used only 1, 4, and 8 are valid
minor per major numbers. If Explicit mode is used this
resource is ignored.
Default: 3
-
tmXBMinorOn
-
Setting this resource to True turns on minor tick marks; False turns
them off.
Default: True
-
tmXTMinorOn
-
Setting this resource to True turns on minor tick marks; False turns
them off.
Default: True
-
tmXBLabelStride
-
Used to skip tick mark labels. The value represent how many tickmarks
to skip be tween tick mark labels when drawing the tick mark
labels. Will cause the tick mark obj ect to draw first then skip.
Default: 0
-
tmXTLabelStride
-
Used to skip tick mark labels. The value represent how many tickmarks
to skip be tween tick mark labels when drawing the tick mark
labels. Will cause the tick mark obj ect to draw first then skip.
Default: 0
-
tmXBDataLeftF
-
Sets the data value that maps to the left hand side of the bottom tick marks.
This resource may be intercepted or disabled by:
Default: 0.0
-
tmXBDataRightF
-
Sets the data value that maps to the right hand side of the bottom tick marks.
This resource may be intercepted or disabled by:
Default: 0.0
-
tmXBTickStartF
-
Sets the beginning of the tick marks. Must be less than
tmXBTickEndF. If tmXBTickStartF is greater than the
minimum data extent no tick marks will be drawn between the minimum
data extent and tmXBTickStartF.
Default: 0.0
-
tmXBTickEndF
-
Sets the ending of the tick marks. Must be greater than
tmXBTickStartF. If tmXBTickEndF is less than the
maximum data extent no tick marks will be drawn between the maximum
data extent and tmXBTickEndF.
Default: 0.0
-
tmXBMaxTicks
-
Used for
Automatic mode ticks only. Specifies the maximum
allowable tick marks for the bottom X Axis.
Default: 7
-
tmXBTickSpacingF
-
Used for
Manual mode ticks only. Specifies the spacing
between major tickmarks. If Log style is being used this
value must be the number of decades(i.e. 1 means ticks will be placed
and labels at 10**1 10**2, etc ... )
Default: 0.0
-
tmXBIrregularPoints
-
Used for
Irregular style ticks only. Specifies an array
of data locations spaced at equal intervals along the bottom
X-Axis. These points represent a discrete approximation to the
desired coordinate system. These points must be strictly
monotonically increasing or decreasing. Therefore periodic coordinate
systems can not be approximated using this resource.
This resource may be intercepted or disabled by:
Default: NULL
-
tmXBValues
-
Used only for
Explicit mode tick marks. This resource is an array
of data locations at which tick marks will be drawn.
V4.0 Status Note 1
Default: NULL
-
tmXBLabels
-
Used only for
Explicit mode tick marks. This resource is an array
of strings that correspond to the values in tmXBValues. Each
element of this resource is placed under the corresponding tick
location in tmXBValues. If an element is NULL (no string)
then no tick label is draw under the corresponding tick mark.
Default: NULL
-
tmXBMajorThicknessF
-
Sets linewidth scale factor for bottom major tick marks. Value is a
multiple of the minimum linewidth on the current device.
Default: 2.0
-
tmXBMajorLineColor
-
Sets the line color index for the major tick marks.
Default: 1
-
tmXBMajorLengthF
-
Sets the length of the X Axis bottom major tick marks in NDC
coordinates. This values scales proportionally to changes in height.
Default: .02
-
tmXBMajorOutwardLengthF
-
Length of the major X Axis bottom tick marks that will be drawn on the
outside o f the tick mark border. Value is in NDC coordinates. This
value scales proportionally to changes in height.
Default: 0.0
-
tmXBMinorThicknessF
-
Sets linewidth scale factor for bottom minor tick marks. Value
represents a mult iple of the current devices minimum linewidth.
Default: 1.0
-
tmXBMinorLineColor
-
Sets color index from bottom minor tick marks.
Default: 1
-
tmXBMinorLengthF
-
Sets the length in NDC coordinates for x bottom tick marks. This value
scales proportionally to changes in height.
Default: .01
-
tmXBMinorOutwardLengthF
-
Length of minor X Axis bottom tick marks that will be draw on the
outside of the tick mark border. Value is in NDC coordinates. This
values scales proportionally to c hanges in height.
Default: 0.0
-
tmXBLabelFont
-
Sets the font index for the bottom X Axis labels.
Default: 0
-
tmXBLabelFontHeightF
-
Sets the font height in NDC coordinates for the bottom X Axis
labels. This value scales proportionally to changes in the width of
the viewport.
Default: 0.02
-
tmXBLabelFontColor
-
Sets the color of the bottom X Axis labels.
Default: 1
-
tmXBLabelFontAspectF
-
Sets the ratio of height/width for a bottom X Axis labels.
Default: 1.3125
- tmXBLabelJust
-
Sets the justification point for all bottom X Axis labels
Default: TopCenter
-
tmXBLabelAngleF
-
Sets the counter clockwise rotation of the X Axis bottom labels.
Default: 0.0
-
tmXBLabelDirection
-
Sets the drawing direction of the X Axis bottom labels.
Default: Across
-
tmXBLabelDeltaF
-
Sets an offset from the default location for the bottom tick mark
labels. This v alue multiplied by the tmXBFontHeightF
represents the amount, in NDC coordinates, tha t the bottom tick marks
will be displaced from their default location in the y dir ection.
Positive value moves labels in positive direction in NDC coordinate
and negative in the negative direction.
Default: 0.0
-
tmXTDataLeftF
-
Sets the data value that maps to the left hand side of the top tick
marks.
This resource may be intercepted or disabled by:
Default: 0.0
-
tmXTDataRightF
-
Sets the data value that maps to the right hand side of the top tick marks.
This resource may be intercepted or disabled by:
Default: 0.0
-
tmXTTickStartF
-
Sets the beginning of the tick marks. Must be less than
tmXTTickEndF. If tmXTTickStartF is greater than the
minimum data extent no tick marks will be dra wn between the minimum
data extent and tmXTTickStartF.
Default: 0.0
-
tmXTTickEndF
-
Sets the ending of the tick marks. Must be greater than
tmXTTickStartF. If tmXTTickEndF is less than the
maximum data extent no tick marks will be drawn between the maximum
data extent and tmXTTickEndF.
Default: 0.0
-
tmXTMaxTicks
-
Used for
Automatic mode ticks only. Specifies the maximum
allowable tick marks for the top X Axis.
Default: 7
-
tmXTTickSpacingF
-
Used for
Manual mode ticks only. Specifies the spacing
between major tickmarks. If Log style is being used this
value must be the number of decades(i.e. 1 means ticks will be placed
and labels at 10**1 10**2, etc ... )
Default: 0.0
-
tmXTIrregularPoints
-
Used for
Irregular style ticks only. Specifies an array
of data locations spaced at equal intervals along the top
X-Axis. These points represent a discrete approximation to the
desired coordinate system. These points must be strictly
monotonically increasing or decreasing. Therefore periodic coordinate
systems can not be approximated using this resource.
approximated using this resource.
This resource may be intercepted or disabled by:
Default: NULL
-
tmXTValues
-
Used only for
Explicit mode tick marks. This resource is
an array of data locations at which tick marks will be drawn.
V4.0 Status Note 1
Default: NULL
-
tmXTLabels
-
Used only for
Explicit mode tick marks. This resource is
an array of strings tha t correspond to the values in
tmXTValues. Each element of this resource is placed under the
corresponding tick location in tmXTValues. If an element is
NULL (no string) then no tick label is drawn under the corresponding
tick mark.
Default: NULL
-
tmXTMajorThicknessF
-
Sets linewidth scale factor for top major tick marks. Value is a
multiple of the minimum linewidth on the current device.
Default: 2.0
-
tmXTMajorLineColor
-
Sets the line color index for the top major tick marks.
Default: 1
-
tmXTMajorLengthF
-
Sets the length of the X Axis top major tick marks in NDC
coordinates. This values scales proportionally to changes in height.
Default: .02
-
tmXTMajorOutwardLengthF
-
Length of the major X Axis top tick marks that will be drawn on the
outside of the tick mark border. Value is in NDC coordinates. This
values scales proportionally to changes in height.
Default: 0.0
-
tmXTMinorThicknessF
-
Sets linewidth scale factor for top minor tick marks. Value represents
a multiple of the current devices minimum linewidth.
Default: 1.0
-
tmXTMinorLineColor
-
Sets color index from top minor tick marks.
Default: 1
-
tmXTMinorLengthF
-
Sets the length in NDC coordinates for x top tick marks. This values scales
proportionally to changes in height.
Default: .01
-
tmXTMinorOutwardLengthF
-
Length of minor X Axis top tick marks that will be draw on the outside
of the tick mark border. Value is in NDC coordinates. This values
scales proportionally to changes in height.
Default: 0.0
-
tmXTLabelFont
-
Sets the font index for the bottom X Axis labels.
Default: 0
-
tmXTLabelFontHeightF
-
Sets the font height in NDC coordinates for the top X Axis
labels. This value changes proportionally to changes in the width of
the viewport.
Default: 0.02
-
tmXTLabelFontColor
-
Sets the color of the top X Axis labels.
Default: 1
-
tmXTLabelFontAspectF
-
Sets the ratio of height/width for a top X Axis labels.
Default: 1.3125
-
tmXTLabelJust
-
Sets the justification point for all top X Axis labels.
Default: BottomCenter
-
tmXTLabelAngleF
-
Sets the counter clockwise rotation of the X Axis top labels.
Default: 0.0
-
tmXTLabelDirection
-
Sets the drawing direction of the X Axis top labels.
Default: Across
-
tmXTLabelDeltaF
-
Sets an offset from the default location for the top tick mark
labels. This value multiplied by the tmXTFontHeightF
represents the amount, in NDC coordinates, tha t the top tick marks
will be displaced from their default location in the y direct ion.
Positive value moves labels in positive direction in NDC coordinate
and negative
in the negative direction.
Default: 0.0
-
tmYUseLeft
-
Causes the right tick marks to use the resources for the left
tickmarks. The resources affected are
tmYRStyle, tmYRMode,
tmYRMinorPerMajor, tmYRNoMinor,
tmYRDataBottomF, tmYRDataTopF,
tmYRTickStartF, tmYRTickEndF, tmYRMaxTicks,
tmYRTickSpacing, tmYRValues, tmYRLabels,
tmYRMajorThicknessF, tmYRMajorLineColor,
tmYRMajorLengthF, tmYRMajorOutwardLengthF,
tmYRMinorThicknessF, tmYRMinorLineColor,
tmYRMinorLengthF, tmYRMinorOutwardLength,
tmYRLabelFont, tmYRLabelFontHeightF,
tmYRLabelFontColor, tmYRLabelFontAspectF,
tmYRLabelAngleF, tmYRLabelDirection,
tmYRLabelDeltaF, tmYRIrregularPoints,
tmYRIrrTensionF, tmYRLabelStride,
tmYRAutoPrecision, tmYRPrecision, and
tmYRFormat.
All other Right TickMark resources are unaffected.
Default: True
-
tmYLOn
-
Setting to True turns on the left tick marks and False turns them off.
Default: True
-
tmYROn
-
Setting to True turns on the right tick marks and False turns them
off.
Default: True
-
tmYLLabelsOn
-
Setting to True turns left labels on if tmYLOn is set. False
turns them off.
Default: True
-
tmYRLabelsOn
-
Setting to True turns right labels on if tmYROn is set. False
turns them off.
Default: False
-
tmYLBorderOn
-
Setting to True turns left border on and False turns it off. Tick
marks will still be drawn unless tmYLOn is False.
Default: True
-
tmYRBorderOn
-
Setting to True turns right border on and False turns it off. Tick
marks will still be drawn unless tmYROn is False.
Default: True
-
tmYLMode
-
This enumerated resource of type NhlTTickMarkMode determines
the method for specifying the spacing of the ticks and the contents of
the labels along the left Y-Axis. It has three possible settings:
Automatic:
- Based on the values of tmYLDataBottomF and
tmYLDataTopF TickMark chooses a 'nice'
spacing between the major tick marks, such that the number of major
ticks does not exceed the value of tmYLMaxTicks. Labels are
generated based on the current settings of tmSciNoteCutoff,
tmYLAutoPrecision, tmYLPrecision, and
tmYLFormat.
Manual:
- Starting with the value tmYLTickStartF
TickMark sets major tick marks at intervals separated
by a distance of tmYLTickSpacingF until tmYLTickEndF
is exceeded. Of these tick marks, only those that fall between
tmYLDataBottomF and tmYLDataTopF may appear along
the left Y-Axis. If tmYLTickStartF and tmYLTickEndF
are not set TickMark issues an informational message
and sets tmYLTickStartF to the minimum of
tmYLDataBottomF and tmYLDataTopF and
tmYLTickEndF to the maximum of tmYLDataBottomF and
tmYLDataTopF. If tmYLTickSpacingF is not set
TickMark issues a warning message and
tmYLMode reverts to
Automatic mode. Labels are
generated based on the current settings of tmYLTickSpacingF,
tmSciNoteCutoff, tmYLAutoPrecision,
tmYLPrecision, and tmYLFormat.
Explicit:
- TickMark uses the array resource tmYLValues
to determine the coordinate positions of the tick marks. Of these
tick marks, only those that fall between tmYLDataBottomF and
tmYLDataTopF may appear along the left Y-Axis. If
tmYLValues is not set TickMark issues a
warning message and tmYLMode reverts to
Automatic mode. The corresponding element of the string
array resource tmYLLabels determines the label used for each
tick specified by tmYLValues. If tmYLLabels is not
set, TickMark issues a warning and outputs no labels for
the left Y-Axis.
Default: Automatic
-
tmYRMode
-
This enumerated resource of type NhlTTickMarkMode determines
the method for specifying the spacing of the ticks and the contents of
the labels along the right Y-Axis. It has three possible settings:
Automatic:
- Based on the values of tmYRDataBottomF and
tmYRDataTopF TickMark chooses a 'nice'
spacing between the major tick marks, such that the number of major
ticks does not exceed the value of tmYRMaxTicks. Labels are
generated based on the current settings of tmSciNoteCutoff,
tmYRAutoPrecision, tmYRPrecision, and
tmYRFormat.
Manual:
- Starting with the value tmYRTickStartF
TickMark sets major tick marks at intervals separated
by a distance of tmYRTickSpacingF until tmYRTickEndF
is exceeded. Of these tick marks, only those that fall between
tmYRDataBottomF and tmYRDataTopF may appear along
the right Y-Axis. If tmYRTickStartF and tmYRTickEndF
are not set TickMark issues an informational message
and sets tmYRTickStartF to the minimum of
tmYRDataBottomF and tmYRDataTopF and
tmYRTickEndF to the maximum of tmYRDataBottomF and
tmYRDataTopF. If tmYRTickSpacingF is not set
TickMark issues a warning message and
tmYRMode reverts to
Automatic mode. Labels are
generated based on the current settings of tmYRTickSpacingF,
tmSciNoteCutoff, tmYRAutoPrecision,
tmYRPrecision, and tmYRFormat.
Explicit:
- TickMark uses the array resource tmYRValues
to determine the coordinate positions of the tick marks. Of these
tick marks, only those that fall between tmYRDataBottomF and
tmYRDataTopF may appear along the right Y-Axis. If
tmYRValues is not set TickMark issues a
warning message and tmYRMode reverts to
Automatic mode. The corresponding element of the string
array resource tmYRLabels determines the label used for each
tick specified by tmYRValues. If tmYRLabels is not
set, TickMark issues a warning and outputs no labels for
the right Y-Axis.
Default: Automatic
-
tmYLStyle
-
This enumerated resource of type NhlTTickMarkStyle sets the
style of the TickMark left Y-Axis. There are 5 styles:
Linear:
- A linear coordinate system is set up along the Y-Axis with the bottom
boundary set to the value of tmYLDataBottomF and the top
boundary set to the value of tmYLDataTopF. If
tmYLDataBottomFand tmYLDataTopF are found to be
equal when compared with a precision of 7 significant digits, a
warning is issued and the left Y-Axis tick marks are turned off.
Log:
- A logarithmic coordinate system is set up along the Y-Axis with
the bottom boundary set to the value of tmYLDataBottomF and the
top boundary set to the value of tmYLDataTopF. If either
tmYLDataBottomF or tmYLDataTopF is less than or equal
to 0.0, a warning is issued an the left Y-Axis tick marks are turned off.
Irregular:
- An irregular coordinate system is set up along the Y-Axis based on
the coordinate samples contained in the array resource
tmYLIrregularPoints. If tmYLIrregularPoints is found
to be invalid, a warning is issued and tmYLStyle reverts to
Linear. If the data bounds tmYLDataBottomF or
tmYLDataTopF are only partially within the range defined by
the maximum and minimum elements of tmYLIrregularPoints, a
warning is issued and, as appropriate, either tmYLDataBottomF or
tmYLDataTopF is reset to the value of the maximum or
minimum element of the tmYLIrregularPoints. If
the range between tmYLDataBottomF and tmYLDataTopF
is entirely outside the range of the tmYLIrregularPoints
array a fatal error is currently issued.
Time:
- Not yet implemented.
Geographic:
- Not yet implemented.
This resource may be intercepted or disabled by:
Default: Linear
-
tmYLIrrTensionF
-
Specifies the value of the tension parameter applied to the spline
approximation used to set up an irregular transformation based on the
values in tmYLIrregularPoints array. This resource is only
used if tmYLStyle is
Irregular. Small values (less than
~1.0) imply a relaxed approximation; large values (greater than ~5.0)
imply a tight approximation.
This resource may be intercepted or disabled by:
V4.0 Status Note 2
Default: 2.0
-
tmYRStyle
-
This enumerated resource of type NhlTTickMarkStyle sets the
style of the TickMark right Y-Axis. There are 5 styles:
Linear:
- A linear coordinate system is set up along the Y-Axis with the bottom
boundary set to the value of tmYRDataBottomF and the top
boundary set to the value of tmYRDataTopF. If
tmYRDataBottomFand tmYRDataTopF are found to be
equal when compared with a precision of 7 significant digits, a
warning is issued and the right Y-Axis tick marks are turned off.
Log:
- A logarithmic coordinate system is set up along the Y-Axis with
the bottom boundary set to the value of tmYRDataBottomF and the
top boundary set to the value of tmYRDataTopF. If either
tmYRDataBottomF or tmYRDataTopF is less than or equal
to 0.0, a warning is issued an the left Y-Axis tick marks are turned off.
Irregular:
- An irregular coordinate system is set up along the Y-Axis based on
the coordinate samples contained in the array resource
tmYRIrregularPoints. If tmYRIrregularPoints is found
to be invalid, a warning is issued and tmYRStyle reverts to
Linear. If the data bounds tmYRDataBottomF or
tmYRDataTopF are only partially within the range defined by
the maximum and minimum elements of tmYRIrregularPoints, a
warning is issued and, as appropriate, either tmYRDataBottomF or
tmYRDataTopF is reset to the value of the maximum or
minimum element of the tmYRIrregularPoints. If
the range between tmYRDataBottomF and tmYRDataTopF
is entirely outside the range of the tmYRIrregularPoints
array a fatal error is currently issued.
Time:
- Not yet implemented.
Geographic:
- Not yet implemented.
This resource may be intercepted or disabled by:
Default: Linear
-
tmYRIrrTensionF
-
Specifies the value of the tension parameter applied to the spline
approximation used to set up an irregular transformation based on the
values in tmYLIrregularPoints array. This resource is only
used if tmYLStyle is
Irregular. Small values (less than
~1.0) imply a relaxed approximation; large values (greater than ~5.0)
imply a tight approximation.
This resource may be intercepted or disabled by:
V4.0 Status Note 2
Default: 2.0
-
tmYLAutoPrecision
-
When True this boolean resource causes TickMark to
set the precision (number of significant digits) for the left tick
mark labels based on the range of values used for the labels. In
general, the value of tmYLPrecision is ignored. However, if
tmYLMode is set to
Manual, the precision is set
such that all significant digits necessary to express the value of the
tmYLTickSpacingF resource are used in determining the
precision. In this case, the value of tmYLPrecision sets a
cap on the number of significant digits used to express the value of
tmYLTickSpacingF.
When set False, the value of tmYLPrecision controls the
precision. However, if the significant digit conversion field
(signalled by the '.' character) is set explicitly in the
tmYLFormat string (according to the rules of Floating Point Format Specification
scheme),then the resources tmYLAutoPrecision and
tmYLPrecision are both ignored, and the precision is
controlled completely by the tmYLFormat specification.
Default: True
-
tmYLPrecision
-
If tmYLAutoPrecision is set False and the significant digit
field in the tmYLFormat string (as specified by the
Floating Point Format Specification
scheme) has the dynamic attribute set on, this resource controls the
precision used for the left tick mark labels. Assuming the default
setting of the tmYLFormat resource, the value set for
ptmYLPrecision will be the number of digits used for the
left tick mark label representing the value with the maximum absolute
value. The other labels will have the same number of digits to the
right of the decimal point, but may have fewer digits to the left of
the decimal point. All labels will be rounded to the number of decimal
places represented.
Default: 4
-
tmYLFormat
-
This string resource specifies, according to the HLU Floating Point Format Specification scheme,
the format of the numbers used to label the major ticks along the left
Y-Axis. It applies only when tmYLMode is set to
Automatic or Manual. Unless set explicitly,
the significant digits conversion field is set dynamically based on
the values of the tmYLAutoPrecision and
tmYLPrecision resources. Likewise, the exponent switch length
conversion field is set dynamically based on the value of the
tmSciNoteCutoff resource. If the leftmost significant digit
conversion field has the dynamic attribute set, the assumed leftmost
significant digit is set dynamically for each label based on largest
absolute value used to generate the left labels. Combined with the
zero format flag, this has the effect of causing all the labels to
contain the same number of places to the right of the decimal
point. The default format string also sets the at-sign format flag to
force fractional values to include an initial '0' character preceding
the decimal point. In addition, the exponent conversion field
includes, by default, the 's' flag to cause exponents to be written
using the superscript notational form.
If tmYLStyle is set to Log, exponential
notation is forced on, regardless of the character used for the
conversion specifier. Also the zero flag is turned off to ensure that
the mantissas (which always evaluate to 1.0 because of the spacing
enforced for Log style labels) are not turned on because
of the need to fill out the significant digits on the right of the
decimal point.
Default: "0@*+^sg"
-
tmYRAutoPrecision
-
When True this boolean resource causes TickMark to
set the precision (number of significant digits) for the right tick
mark labels based on the range of values used for the labels. In
general, the value of tmYRPrecision is ignored. However, if
tmYRMode is set to
Manual, the precision is set
such that all significant digits necessary to express the value of the
tmYRTickSpacingF resource are used in determining the
precision. In this case, the value of tmYRPrecision sets a
cap on the number of significant digits used to express the value of
tmYRTickSpacingF.
When set False, the value of tmYRPrecision controls the
precision. However, if the significant digit conversion field
(signalled by the '.' character) is set explicitly in the
tmYRFormat string (according to the rules of Floating Point Format Specification
scheme),then the resources tmYRAutoPrecision and
tmYRPrecision are both ignored, and the precision is
controlled completely by the tmYRFormat specification.
Default: True
-
tmYRPrecision
-
If tmYRAutoPrecision is set False and the significant digit
field in the tmYRFormat string (as specified by the
Floating Point Format Specification
scheme) has the dynamic attribute set on, this resource controls the
precision used for the right tick mark labels. Assuming the default
setting of the tmYRFormat resource, the value set for
ptmYRPrecision will be the number of digits used for the
right tick mark label representing the value with the maximum absolute
value. The other labels will have the same number of digits to the
right of the decimal point, but may have fewer digits to the left of
the decimal point. All labels will be rounded to the number of decimal
places represented.
Default: 4
-
tmYRFormat
-
This string resource specifies, according to the HLU Floating Point Format Specification scheme,
the format of the numbers used to label the major ticks along the
right Y-Axis. It applies only when tmYRMode is set to
Automatic or Manual. Unless set explicitly,
the significant digits conversion field is set dynamically based on
the values of the tmYRAutoPrecision and
tmYRPrecision resources. Likewise, the exponent switch length
conversion field is set dynamically based on the value of the
tmSciNoteCutoff resource. If the leftmost significant digit
conversion field has the dynamic attribute set, the assumed leftmost
significant digit is set dynamically for each label based on largest
absolute value used to generate the right labels. Combined with the
zero format flag, this has the effect of causing all the labels to
contain the same number of places to the right of the decimal
point. The default format string also sets the at-sign format flag to
force fractional values to include an initial '0' character preceding
the decimal point. In addition, the exponent conversion field
includes, by default, the 's' flag to cause exponents to be written
using the superscript notational form.
If tmYRStyle is set to Log, exponential
notation is forced on, regardless of the character used for the
conversion specifier. Also the zero flag is turned off to ensure that
the mantissas (which always evaluate to 1.0 because of the spacing
enforced for Log style labels) are not turned on because
of the need to fill out the significant digits on the right of the
decimal point.
Default: "0@*+^sg"
-
tmYMajorGrid
-
Setting to True turns on the Y Axis grid. Grid lines will extend from
the left tick marks to the right border. If the left ticks are turned
off the right tick marks will be extended to the left border.
Default: False
-
tmYMinorGrid
-
Setting to True turns on the Y Axis grid. Grid lines will extend from
the left tick marks to the right border. If the left ticks are turned
off the right tick marks will be extended to the left border.
Default: False
-
tmYMajorGridThicknessF
-
Sets the linewidth scale factor for the Y Axis major grid lines.
Default: 2.0
-
tmYMajorGridLineColor
-
Sets the color index for the Y Axis major grid lines.
Default: 1
-
tmYMajorGridLineDashPattern
-
Sets the dash pattern for the Y Axis major grid lines.
Default: 0
-
tmYMinorGridThicknessF
-
Sets the linewidth scale factor for the Y Axis minor grid lines.
Default: 1.0
-
tmYMinorGridLineColor
-
Sets the color index for the Y Axis minor grid lines.
Default: 1
-
tmYMinorGridLineDashPattern
-
Sets the dash pattern index for the Y Axis minor grid lines.
Default: 0
-
tmYLMinorPerMajor
-
Sets the number of minor tick marks per major tick marks. For
Log style plots this value must be either 1,4, or 8.
Default: 3
-
tmYRMinorPerMajor
-
Sets the number of minor tick marks per major tick marks. For
Log
style plots this value must be either 1,4, or 8.
Default: 3
-
tmYLMinorOn
-
Turns on minor tickmarks when set to True; False turns them off.
Default: True
-
tmYRMinorOn
-
Turns on minor tickmarks when set to True; False turns them off.
Default: True
-
tmYLLabelStride
-
Used to skip tick mark labels. The value represents how many tickmarks
to skip between tick mark labels when drawing the tick mark
labels. Will cause the tick mark object to draw first then skip.
Default: 0
-
tmYRLabelStride
-
Used to skip tick mark labels. The value represents how many tickmarks
to skip between tick mark labels when drawing the tick mark
labels. Will cause the tick mark object to draw first then skip.
Default: 0
-
tmYLDataTopF
-
The data value that will be mapped to the top left corner of Y Axis.
This resource may be intercepted or disabled by:
Default: 0.0
-
tmYLDataBottomF
-
The data value that will be mapped to the bottom left corner of the y
axis.
This resource may be intercepted or disabled by:
Default: 0.0
-
tmYLTickStartF
-
Sets the beginning of the tick marks. Must be less than
tmYLTickEndF. If tmYLTickStartF is greater than the
minimum data extent no tick marks will be drawn between the minimum
data extent and tmYLTickStartF.
Default: 0.0
-
tmYLTickEndF
-
Sets the ending of the tick marks. Must be greater than
tmYLTickStartF. If tmYLTickEndF is less than the
maximum data extent no tick marks will be drawn between the maximum
data extent and tmYLTickEndF.
Default: 0.0
-
tmYLMaxTicks
-
Used with
Automatic mode. Sets the maximum number of
tickmarks that will be chosen.
Default: 7
-
tmYLTickSpacingF
-
Used for
Manual mode ticks only. Specifies the spacing
between major tickmarks. If
Default: 0.0
-
tmYLIrregularPoints
-
Used for
Irregular style ticks only. Specifies an array
of data locations spaced at equal intervals along the left
Y-Axis. These points represent a discrete approximation to the
desired coordinate system. These points must be strictly
monotonically increasing or decreasing. Therefore periodic coordinate
systems can not be approximated using this resource.
approximated using this resource.
This resource may be intercepted or disabled by:
Default: NULL
-
tmYLValues
-
Used only for
Explicit mode tick marks. This resource is
an array of data locations at which tick marks will be drawn.
V4.0 Status Note 1
Default: NULL
-
tmYLLabels
-
Used only for
Explicit mode tick marks. This resource is an array
of strings to be used as tick mark labels for the locations in
tmYLValues. If a NULL is used in place of a string no label
will appear at that tick mark location.
Default: NULL
-
tmYLMajorThicknessF
-
Sets the linewidth scale factor to be used for the Y Axis left major
tick marks.
Default: 2.0
-
tmYLMajorLineColor
-
Sets the line color index to be used for drawing the Y Axis left major
tickmarks.
Default: 1
-
tmYLMajorLengthF
-
Sets the length of the Y Axis left major tick marks in NDC
coordinates. This values scales proportionally to changes in width.
Default: .02
-
tmYLMajorOutwardLengthF
-
Sets the length of the major tick marks that will be drawn outside of
the viewport. This value scales proportionally to changes in width.
Default: 0.0
-
tmYLMinorThicknessF
-
Sets the linewidth scale factor for the Y Axis minor tickmarks.
Default: 1.0
-
tmYLMinorLineColor
-
Sets the color index for the Y Axis minor tickmarks.
Default: 1
-
tmYLMinorLengthF
-
Sets minor tick mark length for the Y Axis minor tick marks. This
values scales proportionally to changes in width.
Default: .01
-
tmYLMinorOutwardLengthF
-
Sets the length of the Y Axis left minor tick marks that will be drawn
outside of the viewport. This values scales proportionally to changes
in width.
Default: 0.0
-
tmYLLabelFont
-
Sets the font index to be used for the Y Axis left tick mark labels.
Default: 0
-
tmYLLabelFontHeightF
-
Sets the height of the Y Axis left labels in NDC coordinates. This
value scales proportionally to changes in the height of the viewport.
Default: 0.02
-
tmYLLabelFontColor
-
Sets the color index for the left Y Axis tick mark labels.
Default: 1
-
tmYLLabelFontAspectF
-
Sets the aspect ratio height/width for each character of the Y Axis
left tick mark labels .
Default: 1.3125
-
tmYLLabelJust
-
Sets font justification point for Y Axis left tick mark labels.
Default: CenterRight
-
tmYLLabelAngleF
-
Sets the counter clockwise rotation for all Y Axis tickmark labels.
Default: 0.0
-
tmYLLabelDirection
-
Sets the drawing direction for all Y Axis tick mark labels.
Default: Across
-
tmYLLabelDeltaF
-
Sets an offset from the default location for the left tick mark
labels. This value multiplied by the tmYLFontHeightF
represents the amount, in NDC coordinates, that the left tick marks
will be displaced from their default location in the x direction.
Positive value moves labels in positive direction in NDC coordinate
and negative in the negative direction.
Default: 0.0
-
tmYRDataTopF
-
The data value that will be mapped to the top right corner of Y Axis.
This resource may be intercepted or disabled by:
Default: 0.0
-
tmYRDataBottomF
-
The data value that will be mapped to the bottom right corner of the Y Axis.
This resource may be intercepted or disabled by:
Default: 0.0
-
tmYRTickStartF
-
Sets the beginning of the tick marks. Must be less than
tmYRTickEndF. If tmYRTickStartF is greater than the
minimum data extent no tick marks will be drawn between the minimum
data extent and tmYRTickStartF.
Default: 0.0
-
tmYRTickEndF
-
Sets the ending of the tick marks. Must be greater than
tmYRTickStartF. If tmYRTickEndF is less than the
maximum data extent no tick marks will be drawn between the maximum
data extent and tmYRTickEndF.
Default: 0.0
-
tmYRMaxTicks
-
Used with
Automatic mode. Sets the maximum number of
tickmarks that will be drawn.
Default: 7
-
tmYRTickSpacingF
-
Used for
Manual mode ticks only. Specifies the spacing
between major tickmarks. If
Default: 0.0
-
tmYRIrregularPoints
-
Used for
Irregular style ticks only. Specifies an array
of data locations spaced at equal intervals along the right
Y-Axis. These points represent a discrete approximation to the
desired coordinate system. These points must be strictly
monotonically increasing or decreasing. Therefore periodic coordinate
systems can not be approximated using this resource.
approximated using this resource.
This resource may be intercepted or disabled by:
Default: NULL
-
tmYRValues
-
Used only for
Explicit mode tick marks. This resource is
an array of data locations at which tick marks will be drawn.
V4.0 Status Note 1
Default: NULL
-
tmYRLabels
-
Used only for
Explicit mode tick marks. This resource is
an array of strings to be used as tick mark labels for the locations
in tmYRValues. If a NULL is used in place of a string no
label will appear at that tick mark location.
Default: NULL
-
tmYRMajorThicknessF
-
Sets the linewidth scale factor for the Y Axis right major tick marks.
Default: 2.0
-
tmYRMajorLineColor
-
Sets the color index for the Y Axis right major tick marks.
Default: 1
-
tmYRMajorLengthF
-
Sets the length of the Y Axis right major tick marks in NDC
coordinates. This values scales proportionally to changes in width.
Default: .02
-
tmYRMajorOutwardLengthF
-
Sets the length of the Y Axis right major tick marks that will be
drawn outside of the current viewport. This value scale proportionally
to changes in width.
Default: 0.0
-
tmYRMinorThicknessF
-
Sets the length of the Y Axis minor tickmarks in NDC coordinates. This
value scale proportionally to changes in width.
Default: 1.0
-
tmYRMinorLineColor
-
Sets the line color index for the right Y Axis minor tick marks.
Default: 1
-
tmYRMinorLengthF
-
Sets the length in NDC coordinates of the Y Axis minor tick
marks. This value scales proportionally to changes in width.
Default: .01
-
tmYRMinorOutwardLengthF
-
Sets the length of the right Y Axis minor tick marks that will be
drawn outside of the viewport. This value scales proportionally to
changes in width.
Default: 0.0
-
tmYRLabelFont
-
Sets the font index for the right Y Axis tick mark labels.
Default: 0
-
tmYRLabelFontHeightF
-
Sets the font height of the Y Axis right labels in NDC
coordinates. This values scales proportionally to changes in viewport
height.
Default: 0.02
-
tmYRLabelFontColor
-
Sets the color index for right Y Axis labels
Default: 1
-
tmYRLabelFontAspectF
-
Sets the ratio of height/width for the right Y Axis label characters
Default: 1.3125
-
tmYRLabelJust
-
Sets the justification point for the right Y Axis labels
Default: CenterLeft
-
tmYRLabelAngleF
-
Sets the counter-clockwise rotation of all of the right Y Axis labels
Default: 0.0
-
tmYRLabelDirection
-
Sets the drawing direction for the right Y Axis labels.
Default: Across
-
tmYRLabelDeltaF
-
Sets an offset from the default location for the right tick mark
labels. This value multiplied by the tmYRFontHeightF
represents the amount, in NDC coordinates, that the right tick marks
will be displaced from their default location in the x direction.
Positive value moves labels in positive direction in NDC coordinate
and negative in the negative direction.
Default: 0.0
